Builder’s Package – $55,000

Brake Package

• Wilwood 6 piston front calipers
• Wilwood 6 piston rear calipers
• Wilwood parking brake calipers for rear
• Matching front and rear drilled and slotted rotors
• Brake pad set

Wheels and Tires

• Torque thrust style wheels with painted centers
• Cheetah Evolution logo center caps
• Custom aluminum lugnuts
• Wheels are 17x9.5 Rear, 17x9 Front
• Mickey Thompson Tires are 295/45R17 Rear and 275/40R17 Front

Factory Package – Body in White

INCLUDES:

• Painted frame – all suspension mounts, harness mounts, PB mounts, Fuel tank mounts included
• Restored GM Alcoa aluminum front up-rights, upper and lower control arms, rear supports, outer axle shafts, . Color choice
• New front and rear wheel bearings
• New Delrin bushings for front control arms – grease-able
• New upper and lower ball joints
• New outer tie-rod ends
• New rack and pinion – (add $600 for power rack)
• New steering column with tilt, turn signals, hazards
• New steering shafts, support bearings and u-joints
• New steel rear half shafts with u-joints
• New adjustable strut rods
• New rear toe control
• Custom trailing arms
• Custom rear shock push rods
• coil-over shocks front and rear
• radiator mount and radiator. Derale fan installed
• Fuel tank and quick fill with monza style cap
• SS brake lines. Flex lines at wheels
• AN braided fuel line. AN vent line
• Wilwood 3 pedal assembly
• Wilwood master cylinders and reservoirs. Fittings, stop light switch, lines to bulkhead
• Parking brake handle and cables
• Front DOT windshield with weatherstrip
• Rear smoked optically clear acrylic window with weatherstrip
• Hand laid fiberglass body
• Hand laid fiberglass Bonnet
• Bonnet hinged. Gas strut rod assist
• Fiberglass inner and outer doors. Outer doors un-trimmed
• Inner doors trimmed to fit and hinged to body. Machined aluminum gullwing hinges.(body work will need to be completed on door)
• Fiberglass dash
• Rear inner fenders. Bonded to body
• Step plates in door openings. Trimmed and bonded to body
• Winters differential with 4:10 gear ratio
• New custom driveshaft and slip yoke with u-joints

Total – $55,000

Contact Us

Fill out the form below and we’ll get back to your shortly.